AirTouch F30i Clear Complete Mask System

UltraCompact ComfiSoft™ fabric cushion with AdaptiSeal™ technology and no pressure points, sitting unobtrusively under the nose

Flexible frame designed to adapt to different facial profiles and head shapes for an accurate fit the first time

QuietAir™ venting to help make sleep feel more peaceful for you and your bed partner

Soft headgear with adjustable sidebands and magnetic clips*

Top-of-head tube connection and quick release elbow — makes it easy to disconnect from therapy without removing the mask

Compatible with AirFit F30i and AirFit X30i

Note: this mask is not compatible with the AirMini

Prescription required

F30i clear frame (small, standard or large)

F30i/X30i standard headgear

F30i cushion (small, medium, or small-wide)

If there is any visible deterioration of a mask component (cracking, crazing, tears etc.) the component should be discarded and replaced.

Daily/After each use: cushion

Weekly: headgear, frame and elbow

1. Soak the components in warm water with a mild liquid detergent.

2. Hand wash the components with a soft bristle brush. Pay particular attention to the vent holes in both cushion and elbow.

3. Thoroughly rinse the components under running water.

4. Leave the components to air dry out of direct sunlight.

If the mask components are not visibly clean, repeat the cleaning steps. Make sure that the vent holes and anti-asphyxia valves are clean and clear

For optimal CPAP therapy results, we recommend replacing your mask parts and accessories on a regular basis

Recommended replacement guidelines:

Cushion: once (1) monthly

Frame System: every three (3) months

Headgear: every six (6) months

User Guide

Fitting Guide

The mask contains magnets that may interfere with certain implants or medical devices. Please refer to the support documents for complete labeling information, including magnet contraindications and warnings.