AirFit F40 Complete Mask System

Lower profile design in a full face mask

Soft silicone AdaptiSeal™ for softness

Fully flexible frame for comfort

Four adjustment points for ease of use

Quick-release elbow for fast connection and disconnection

Combines high seal performance with comfort in a minimalist, flexible and easy-to-use design

Short tube for natural movement

A soft, fully flexible frame adapts to the face all night long

Note: this mask is not compatible with the AirMini

Prescription required

F40 headgear (small, standard or large)

F40 mask frame (small-wide, medium or large)

F40 cushion (small-wide, medium or large)

If there is any visible deterioration of a mask component (cracking, crazing, tears etc.) the component should be discarded and replaced.

Daily/After each use: Cushion, elbow and short tube, vent ring

Weekly: Headgear, frame
1. Soak the components in warm water with a mild liquid detergent. Ensure that there are no air bubbles while soaking.
2. Shake the components vigorously in the water and hand wash with a soft bristle brush. Pay particular attention to the vent holes in the QuietAir/Multi-hole vent ring.
3. Thoroughly rinse the components under running water.
4. Squeeze the fabric components to remove excess water.
5. Leave the components to air dry out of direct sunlight. If the mask components are not visibly clean, repeat the cleaning steps. Make sure that the vents and anti-asphyxia valves are clean and clear.

Recommended replacement guidelines:

Cushion: once (1) monthly

Frame: every three (3) months

Headgear: every six (6) months

User Guide

Fitting Guide

The mask contains magnets that may interfere with certain implants or medical devices. Please refer to the support documents for complete labeling information, including magnet contraindications and warnings.

Shipping method

Ground - $5.00 - 5 to 8 business days

Ground order over $50 Free - 5 to 8 business days

Express - $15.00 - 2 to 3 business days

Express orders including PAP device(s)*** Free - 2 to 3 business days

Priority Express $40.00 - 1 to 2 business days

*All rates are shown in US Dollars and subject to change
**Expedite may substitute another carrier at our discretion
***Orders that include the purchase of a PAP device

Delivery will be to the address specified on your order, which must be within the United States and in a state where Expedite is licensed to distribute medical devices. We do not deliver to PO boxes.

The delivery charges specified as part of your order for your selected shipping will apply. Delivery charges will be disclosed in your cart prior to you placing your order.

Once your order has been shipped from our warehouse, you will receive an automated email with the invoice and tracking reference, allowing you to track your order. Title to Products and risk of loss shall pass to you upon delivery of Products to the carrier at the point of shipment.

We take reasonable efforts to meet the delivery times specified in this section. However, occasionally delivery times may be affected by factors beyond our control and therefore they cannot be guaranteed.

You must comply with all applicable laws and regulations of the United States. We will not be liable or responsible if you break any such law.