AirFit F40 Frame System (Without Headgear)

Fully flexible frame that’s soft on your face

The frame sits below the eyes, designed for comfort and to reduce facial marks

Magnetic clips easily snap together, making it quick to put on and off

Quick-release elbow lets you connect and disconnect to therapy quickly, even in the middle of the night

QuietAir™ diffused venting creates a more peaceful bedroom

Soft, silicone cushion and short tube that allow you to move during the night while keeping seal

Includes replacement frame system (without headgear) for the Resmed AirFit F40 full face mask

Frame system includes frame and full face cushion. Headgear not included

Daily/After each use: cushion, elbow and short
tube, vent ring

Weekly: frame
1. Soak the components in warm water with a mild liquid detergent. Ensure that there are no air bubbles while soaking.
2. Shake the components vigorously in the water and hand wash with a soft bristle brush. Pay particular attention to the vent holes in the QuietAir/Multi-hole vent ring.
3. Thoroughly rinse the components under running water.
4. Squeeze the fabric components to remove excess water.
5. Leave the components to air dry out of direct sunlight. If the mask components are not visibly clean, repeat the cleaning steps. Make sure that the
vents and anti-asphyxia valves are clean and clear.

Recommended replacement guidelines:

Cushion: once (1) monthly

Frame: every three (3) months

User Guide

The mask contains magnets that may interfere
with certain implants or medical devices. Please refer to the support documents for complete labeling
information, including magnet contraindications and warnings.