AirFit X30i Starter Pack

Enjoy a quiet night’s sleep. With QuietAir™ diffused venting, you and your partner will enjoy a less disruptive, quiet night’s sleep

Quick release for bedtime breaks. The quick-release elbow makes it easy to disconnect the mask from the tubing if you need to get up at night

Sleep the way you want. The tube connects to the frame at the top of the head so that it’s out of the way, giving you the freedom to sleep in any position without compromising seal performance

Easy to use and remove. The headgear has magnetic clips so you can put on and take off your mask in just two simple snaps*

Modular headgear and frame system is compatible with AirFit™ F30i mask

Pillows cushion rests on the edge of the nares to seal on contact. The pillows cushion connects to the oral cushion and disperses therapy pressure gently to the patient through the nose

Oral nasal mask combines the coverage of a full face cushion with the seal and stability of nasal pillows cushion, using dual cushions for comfort and performance

The mask is an ideal option for patients who breathe through their mouth and want freedom of movement with stability

Note: this mask is not compatible with the AirMini

Prescription required 

AirFit F30i/X30i frame (small, standard or large)

AirFit X30i standard oral cushion

AirFit F30i/X30i headgear

AirFit X30i nasal pillows cushion (small, medium, large)

Daily/After each use: cushion, pillows, oral cushion

Weekly: headgear, frame, elbow

1. Soak the components in warm water with a mild liquid detergent.
2. Hand wash the components with a soft bristle brush. Pay particular
attention to the vents in both cushion and elbow.
3. Thoroughly rinse the components under running water.
4. For AirFit X30i, shake the oral cushion to remove any excess water from the vent.
5. Leave the components to air dry out of direct sunlight.
If the mask components are not visibly clean, repeat the cleaning steps. Make sure that the vents and anti-asphyxia valves are clean and clear.

Recommended replacement guidelines:

Cushion: twice (2) monthly

Frame: every three (3) months

Headgear: every six (6) months

User Guide

The mask contains magnets that may interfere with certain implants or medical devices. Please refer to the support documents for complete labeling information, including magnet contraindications and warnings.