AirFit F30i Frame System (Without Headgear)

Flexible conduit frame allows pressurized air to flow through the elbow and into the frame and cushion

UltraCompact full face cushion design is curved for stability and improved seal performance

Quick-release elbow allows for easy disconnection. It stays attached to the tubing to ensure mask parts don’t
get lost or stuck

Top-of-head tube design gives patients the freedom to sleep in any position

Includes replacement frame system (without headgear) for the Resmed AirFit F30i full face mask

Frame system includes frame and full face cushion. Headgear not included

Regularly clean your mask and its components to maintain the quality of your mask and to prevent the growth of germs that can adversely affect your health

If there is any visible deterioration of a mask component (cracking, crazing, tears etc.) the component should be discarded and replaced.

Daily/After each use: Cushion

Weekly: frame and elbow

1. Soak the components in warm water with a mild liquid detergent.
2. Hand wash the components with a soft bristle brush. Pay particular attention to the vent holes in both cushion and elbow.
3. Thoroughly rinse the components under running water.
4. Leave the components to air dry out of direct sunlight.
If the mask components are not visibly clean, repeat the cleaning steps. Make sure that the vent holes and anti-asphyxia valves are clean and clear.

Recommended replacement guidelines:

Frame System: every three (3) months

Cushion: once (1) monthly

User Guide

The mask contains magnets that may interfere with certain implants or medical devices. Please refer to the support documents for complete labeling information, including magnet contraindications and warnings.

Shipping method

Ground - $5.00 - 5 to 8 business days

Ground order over $50 Free - 5 to 8 business days

Express - $15.00 - 2 to 3 business days

Express orders including PAP device(s)*** Free - 2 to 3 business days

Priority Express $40.00 - 1 to 2 business days

*All rates are shown in US Dollars and subject to change
**Expedite may substitute another carrier at our discretion
***Orders that include the purchase of a PAP device

Delivery will be to the address specified on your order, which must be within the United States and in a state where Expedite is licensed to distribute medical devices. We do not deliver to PO boxes.

The delivery charges specified as part of your order for your selected shipping will apply. Delivery charges will be disclosed in your cart prior to you placing your order.

Once your order has been shipped from our warehouse, you will receive an automated email with the invoice and tracking reference, allowing you to track your order. Title to Products and risk of loss shall pass to you upon delivery of Products to the carrier at the point of shipment.

We take reasonable efforts to meet the delivery times specified in this section. However, occasionally delivery times may be affected by factors beyond our control and therefore they cannot be guaranteed.

You must comply with all applicable laws and regulations of the United States. We will not be liable or responsible if you break any such law.