AirTouch F20 Frame System (Without Headgear)

UltraSoft™ memory foam cushion is super soft and uniquely comfortable

Magnetic clips mean two simple snaps and your mask is on or off

Quick-release elbow allows you to get up at night and disconnect without removing the mask

Soft and flexible frame sits underneath the eyes and adapts to different facial types, while integrated padding adds softness

Diffused venting evenly disperses air and dampens air flow

The mask frame is designed to also work with the Resmed AirFit™ F20 silicone cushion

Includes replacement frame system (without headgear) for the Resmed AirTouch F20 CPAP mask

Frame system includes frame, soft sleeves, cushion and elbow. Headgear not included

Cleaning the cushion
You do not need to clean the cushion every day. If any visible deterioration of the cushion is apparent, the cushion should be discarded and replaced.
If required, wipe the outside of the foam cushion with CPAP wipes or similar alcohol-free wipes and allow to dry.
Do not rinse or submerge in liquid
Do not expose to domestic cleaning products or cleaning devices
Do not store or place in direct sunlight.

Cleaning the frame and elbow

Daily:

1. Disassemble the mask components according to the disassembly instructions.
2. Rinse the frame and elbow under running water.
3. Clean with a soft brush until dirt is removed.
4. Soak the components in warm water (approximately 86°F/30°C) with a mild liquid detergent for up to ten minutes.
5. Shake the components vigorously in the water for at least one minute.
6. Brush the moving part of the elbow and around the vent holes.
7. Brush the areas of the frame where the arms connect, and inside and outside the frame where the elbow connects.
8. Rinse the components under running water.
9. Leave the components to air dry out of direct sunlight. Make sure to squeeze the arms of the frame to ensure excess water is removed.

Recommended replacement guidelines:

Cushion: every two (2) weeks

Frame: every three (3) months

User Guide

The mask contains magnets that may interfere with certain implants or medical devices. Please refer to the support documents for complete labeling information, including magnet contraindications and warnings.

Shipping method

Ground - $5.00 - 5 to 8 business days

Ground order over $50 Free - 5 to 8 business days

Express - $15.00 - 2 to 3 business days

Express orders including PAP device(s)*** Free - 2 to 3 business days

Priority Express $40.00 - 1 to 2 business days

*All rates are shown in US Dollars and subject to change
**Expedite may substitute another carrier at our discretion
***Orders that include the purchase of a PAP device

Delivery will be to the address specified on your order, which must be within the United States and in a state where Expedite is licensed to distribute medical devices. We do not deliver to PO boxes.

The delivery charges specified as part of your order for your selected shipping will apply. Delivery charges will be disclosed in your cart prior to you placing your order.

Once your order has been shipped from our warehouse, you will receive an automated email with the invoice and tracking reference, allowing you to track your order. Title to Products and risk of loss shall pass to you upon delivery of Products to the carrier at the point of shipment.

We take reasonable efforts to meet the delivery times specified in this section. However, occasionally delivery times may be affected by factors beyond our control and therefore they cannot be guaranteed.

You must comply with all applicable laws and regulations of the United States. We will not be liable or responsible if you break any such law.