AirFit/AirTouch F20 Mask Kit for AirMini

The InfinitySeal silicone cushion allows for maximum movement and comfort while you sleep. Compatible with the AirMini F20 mask, this lightweight cushion molds around your nose and is designed to stay sealed at any airflow pressure setting

The F20 full face mask is also compatible with ResMed's UltraSoft memory foam cushion and provides a super soft and uniquely comfortable experience. Convenient for those with sensitive skin or facial hair

Created without the need for forehead support, the F20 full face mask allows for unobstructed visibility

HumidX F20 technology is designed to deliver a comfortable and convenient therapy experience — without the hassle of distilled water.

HumidX F20 captures heat and moisture to provide comfort and effective humidification for most climates and sleep environments. Compatible with both AirFit silicone and AirTouch memory foam cushions

Plush headgear, along with the soft and flexible frame, provides ultimate comfort. Plus, with four points of adjustment, the F20 headgear allows users to easily address leaks or other fit issues that may occur during sleep

Elbow features quick-release technology to easily connect and disconnect during the night for more freedom, without compromising your mask fit

Prescription required

F20 mask frame

F20 headgear (blue in size standard or lavender for Her in size small)

AirFit silicone or AirTouch memory foam cushion (small, medium, or large)

F20 QuietAir™ elbow

F20 connector for AirMini

HumidX™ F20 cartridge

AirMini tube

This mask purchase does not include an AirMini CPAP machine

Daily Cleaning

Step 1. Take the mask apart into its main component parts, namely the cushion*, frame and mask tube. Magnetic clips can remain attached to the headgear during cleaning. The HumidX cannot be washed. Set aside the HumidX in a clean, dry location. *see AirTouch F20 cushion instructions below

Step 2. Gently rub each part in warm water (~30°C or 86°F) and mild liquid detergent until clean, paying particular attention to cleaning the rotatable elbow, vent holes, frame where the arms connect, and inside and outside the frame where the elbow connects.

Step 3. Rinse well under running water and allow to air dry out of direct sunlight.

Weekly Cleaning

Step 1. Take the mask apart into its main components parts, namely the frame, mask tube and the headgear. Magnetic clips can remain attached to the headgear during cleaning. The HumidX cannot be washed. Set aside the HumidX in a clean, dry location.

Step 2. Gently scrub the frame and its elbow area in warm water (~30°C or 86°F) and mild liquid detergent with a soft bristle brush.

Step 3. Rub and squeeze the headgear in warm water (~30°C or 86°F) and mild liquid detergent until clean.

Step 4. Rinse both the headgear and frame under running water until the water is clear. Ensure you also squeeze the headgear while rinsing.

Step 5. Allow both to air dry out of direct sunlight.

*AirTouch F20 Cushion: (as required) the cushion must not be submerged in liquid as this may damage the cushion and affect mask performance.
Discard the cushion if it is submerged in liquid or heavily soiled.
Do not expose the cushion to domestic cleaning products or cleaning devices.
You do not need to clean the AirTouch F20 cushion every day. It is recommended to replace your cushion every month. If any visible deterioration of the cushion is apparent, the cushion should be discarded
and replaced. If required, wipe the outside of the foam cushion with CPAP wipes or similar alcohol-free wipes and allow to dry. Do not store or place the cushion in direct sunlight

F20 User Guide

F20 Fitting Guide

The mask contains magnets that may interfere with certain implants or medical devices. Please refer to the support documents for complete labeling information, including magnet contraindications and warnings.

Shipping method

Ground - $5.00 - 5 to 8 business days

Ground order over $50 Free - 5 to 8 business days

Express - $15.00 - 2 to 3 business days

Express orders including PAP device(s)*** Free - 2 to 3 business days

Priority Express $40.00 - 1 to 2 business days

*All rates are shown in US Dollars and subject to change
**Expedite may substitute another carrier at our discretion
***Orders that include the purchase of a PAP device

Delivery will be to the address specified on your order, which must be within the United States and in a state where Expedite is licensed to distribute medical devices. We do not deliver to PO boxes or the following states: 

• Alabama
• Florida
• Montana
• Ohio
• Kentucky
• North Dakota
• Tennessee

The delivery charges specified as part of your order for your selected shipping will apply. Delivery charges will be disclosed in your cart prior to you placing your order.

Once your order has been shipped from our warehouse, you will receive an automated email with the invoice and tracking reference, allowing you to track your order. Title to Products and risk of loss shall pass to you upon delivery of Products to the carrier at the point of shipment.

We take reasonable efforts to meet the delivery times specified in this section. However, occasionally delivery times may be affected by factors beyond our control and therefore they cannot be guaranteed.

You must comply with all applicable laws and regulations of the United States. We will not be liable or responsible if you break any such law.

Standard Returns

Expedite accepts returns of products purchased directly through the Resmed Shop website within 30 days of delivery. To qualify for a refund, items must be unopened, unused, and in their original condition and packaging. 

Please contact our Customer Service team at support@eshop.resmed.com for instructions on how to complete a return.  Refunds for eligible returns will be issued to the original form of payment used for the purchase.  Please note, Expedite cannot accept returns without prior authorization from our Customer Service team.

For more information visit our returns policy