AirFit F20 for Her Frame System (Without Headgear)

Soft and flexible frame sits underneath the eyes and adapts to different facial types, while its integrated padding provides added softness

Quick-release elbow makes it simple to disconnect from the tubing without removing the mask

Diffused venting evenly disperses air to dampen air flow and noise out of the
mask

InfinitySeal™ cushion provides an effective seal across a wide range of therapy pressures

Includes replacement frame system (without headgear) for the Resmed AirFit F20 for Her full face mask

Frame system includes frame, soft sleeves, cushion and elbow. Headgear not included

Regularly clean your mask and its components to maintain the quality of your mask and to prevent the growth of germs that can adversely affect your health.

Daily/After each use:

1. Rinse the frame, elbow and cushion under running water. Clean with a soft brush until dirt is removed.

2. Soak the components in warm water (approximately 86°F/30°C) with a mild liquid detergent for up to ten minutes.

3. Shake the components vigorously in the water for at least
one minute.

4. Brush the moving parts of the elbow and around the vent holes.

5. Brush the areas of the frame where the arms connect, and inside and outside the frame where the elbow connects.

6. Rinse the components under running water.

7. Leave the components to air dry out of direct sunlight. Make sure to squeeze the arms of the frame to ensure that excess water is removed.

Recommended replacement guidelines:

Frame System: every three (3) months

User Guide

The mask contains magnets that may interfere with certain implants or medical devices. Please refer to the support documents for complete labeling information, including magnet contraindications and warnings.