AirFit F20 Complete Mask System

InfinitySeal™ cushion is designed to stay sealed at any airflow pressure setting

Magnetic clips mean two simple snaps and your mask is on or off

Plush headgear and soft, flexible frame provide extra comfort

Quick-release elbow allows you to get up at night and disconnect without removing the mask

Note: to use this mask with AirMini the F20 set up pack is required. If you are currently using the AirMini with a different style mask, then you will need to purchase the AirFit F20 Mask Connector

Prescription required

F20 frame system (includes frame, soft sleeves, cushion and elbow)

F20 standard headgear with clips (other sizes available for purchase)

Regularly clean your mask and its components to maintain the quality of your mask and to prevent the growth of germs that can adversely affect your health

Daily/After each use:
1. Disassemble the mask according to the disassembly instructions.
2. Rinse the frame, elbow and cushion under running water. Clean with a soft brush until dirt is removed.
3. Soak the components in warm water with a mild liquid detergent for up to ten minutes.
4. Shake the components in the water.
5. Brush the moving parts of the elbow and around the vent holes.
6. Brush the areas of the frame where the arms connect, and inside and outside the frame where the elbow connects.
7. Rinse the components under running water.
8. Leave the components to air dry out of direct sunlight. Make sure to squeeze the arms of the frame to ensure that excess water is removed.

Weekly:
1. Disassemble the mask. The magnets can remain attached to the headgear during cleaning.
2. Handwash the headgear in warm water with mild liquid detergent.
3. Rinse the headgear under running water. Inspect to ensure the headgear is clean and detergent free. Wash and rinse again, if necessary.
4. Squeeze the headgear to remove excess water.
5. Leave the headgear to air dry out of direct sunlight.

Recommended replacement guidelines:

Cushion: once (1) monthly

Frame System: every three (3) months

Headgear: every six (6) months

Fitting Guide

User Guide

The mask contains magnets that may interfere with certain implants or medical devices. Please refer to the support documents for complete labeling information, including magnet contraindications and warnings.