AirFit/AirTouch F20 Setup Pack for AirMini
AirFit/AirTouch F20 Setup Pack for AirMini
AirFit/AirTouch F20 Setup Pack for AirMini
  • Load image into Gallery viewer, AirFit/AirTouch F20 Setup Pack for AirMini
  • Load image into Gallery viewer, AirFit/AirTouch F20 Setup Pack for AirMini
  • Load image into Gallery viewer, AirFit/AirTouch F20 Setup Pack for AirMini

Prescription Required

AirFit/AirTouch F20 Setup Pack for AirMini

ResMed Rx
$56.00
$56.00
Sold out

Need further support please call customer service at 833 968-2727

Everything needed to connect the AirFit™ F20 or AirTouch™ F20 full face masks to AirMini™, including AirMini tube, F20 connector for AirMini and HumidX™ F20 cartridge

Prescription required

  • The F20 setup pack includes a special elbow adapter that connects the AirFit F20 and AirTouch F20 masks to the AirMini tube

    The included HumidX F20 cartridge can be attached to the interior of the mask cushion for waterless humidification

    AirMini tube: 0.6” (15 mm) inner diameter

    AirMini tube: 6’2” (1.9 m) length

    Prescription required

  • F20 connector for AirMini

    HumidX F20 cartridge

    AirMini tube

    The F20 setup pack does not include a mask or AirMini CPAP machine

  • Clean and check the AirMini tubing by hand weekly

    Never wash it in a dishwasher or washing machine

    Separate tubing from ActiveAir vent connector

    Soak and wash the tubing in warm water (~30°C or 86°F) and mild liquid detergent

    Rinse well inside and out under running water

    Hang the tubing so that each end can drain, and leave it to air dry out of direct sunlight

    Cartridges should be replaced after 30 days of use and are not suitable for washing.