AirTouch N20 Frame System (Without Headgear)
AirTouch N20 Frame System (Without Headgear)
AirTouch N20 Frame System (Without Headgear)
AirTouch N20 Frame System (Without Headgear)
  • Load image into Gallery viewer, AirTouch N20 Frame System (Without Headgear)
  • Load image into Gallery viewer, AirTouch N20 Frame System (Without Headgear)
  • Load image into Gallery viewer, AirTouch N20 Frame System (Without Headgear)
  • Load image into Gallery viewer, AirTouch N20 Frame System (Without Headgear)

AirTouch N20 Frame System (Without Headgear)

ResMed
UPC: 619498639564
Regular price
$81.00
Sale price
$81.00
Regular price
Sold out
Unit price
per 

The Resmed AirTouch™ mask series is where comfort meets convenience. Its UltraSoft memory foam cushion delivers a uniquely comfortable experience

    • Resmed UltraSoft™ memory foam cushion is uniquely comfortable

      Minimal cleaning requirements give you time back in the morning

      The mask frame is designed to also work with the Resmed AirFit™ N20 silicone cushion

    • Includes replacement frame system (without headgear) for the Resmed AirTouch N20 CPAP mask

      Frame system includes frame, cushion and elbow with short tube. Headgear not included

    • Elbow and short tube (Daily/After each use)

      1. Soak and agitate the elbow and short tube in warm water (approximately 86°F/30°C) using a mild liquid detergent for up to 10 minutes.
      2. Clean the components with a soft bristle brush, paying particular attention to the small vent holes on the elbow.
      3. Thoroughly rinse the components under warm flowing drinking quality water.
      4. Inspect each component to ensure that they are visually clean and free of detergent residue. If required, repeat washing.
      5. Allow the components to dry out of direct sunlight before assembling.

      Frame (Weekly)

      The magnetic clips on the frame can be left on for washing.
      1. Soak and agitate the separated headgear and frame in warm water (approximately 86°F/30°C) using a mild liquid detergent for up to 10 minutes.
      2. To rinse the components, repeatedly squeeze them under warm flowing drinking quality water until it is free of detergent residue.
      3. Squeeze the components to remove excess water.
      4. Allow the components to dry out of direct sunlight before assembling.

      AirTouch N20 cushion (as required)
      The cushion must not be submerged in liquid as this may damage the cushion and affect mask performance.
      Discard the cushion if it is submerged in liquid or heavily soiled.
      Do not expose the cushion to domestic cleaning products or cleaning devices.
      You do not need to clean the AirTouch N20 cushion every day. It is recommended to replace your cushion every month. If any visible deterioration of the cushion is apparent, the cushion should be discarded
      and replaced. If required, wipe the outside of the foam cushion with CPAP wipes or similar alcohol-free wipes and allow to dry. Do not store or place the cushion in direct sunlight

      Recommended replacement guidelines:

      Cushion: once (1) monthly

      Frame: every three (3) months

      User Guide

    • The mask contains magnets that may interfere with certain implants or medical devices. Please refer to the support documents for complete labeling information,including magnet contraindications and warnings.

    • Need further support please call customer service at 833 968-2727