AirSense 10 Autoset CPAP Machine + AirTouch F20 Mask Bundle

AirSense 10 Machine:

Auto-adjusting machines change airflow pressure levels throughout the night based on your needs

Includes three different therapy modes: AutoSet, AutoSet for Her and CPAP

Sleek, modern design that will look great by the bed

AutoRamp™ feature delivers a low airflow pressure to help you fall asleep, then steadily increases to your prescribed level

Connects to the Resmed myAir™ online support program and app that automatically sends your therapy data to your computer or smartphone

Available over-the-air software updates provide maintenance and feature updates

Prescription required

AirTouch F20 Complete Mask System:

F20 frame system (includes frame, soft sleeves, cushion and elbow)

F20 headgear with clips

Prescription required

AirSense™10 AutoSet machine

ClimateLineAir™ heated tube

HumidAir™ heated humidifier tub

90W power supply unit

Standard air filter

Carry bag

F20 frame system (includes frame, soft sleeves, cushion and elbow)

F20 headgear with clips

Cleaning the cushion

You do not need to clean the cushion every day. If any visible deterioration of the cushion is apparent, the cushion should be discarded and replaced.
If required, wipe the outside of the foam cushion with CPAP wipes or similar alcohol-free wipes and allow to dry.
Do not rinse or submerge in liquid
Do not expose to domestic cleaning products or cleaning devices
Do not store or place in direct sunlight.

Cleaning the frame and elbow

Daily:

1. Disassemble the mask components according to the disassembly instructions.
2. Rinse the frame and elbow under running water.
3. Clean with a soft brush until dirt is removed.
4. Soak the components in warm water (approximately 86°F/30°C) with a mild liquid detergent for up to ten minutes.
5. Shake the components vigorously in the water for at least one minute.
6. Brush the moving part of the elbow and around the vent holes.
7. Brush the areas of the frame where the arms connect, and inside and outside the frame where the elbow connects.
8. Rinse the components under running water.
9. Leave the components to air dry out of direct sunlight. Make sure to squeeze the arms of the frame to ensure excess water is removed.

Cleaning the headgear

Weekly:

1. Disassemble the mask. The magnets can remain attached to the headgear during cleaning.
2. Handwash the headgear in warm water (approximately 86°F/30°C) with mild liquid detergent.
3. Rinse the headgear under running water. Inspect to ensure the headgear is clean and detergent free. Wash and rinse again if necessary.
4. Squeeze the headgear to remove excess water.
5. Leave the headgear to air dry out of direct sunlight

Recommended replacement guidelines:

Cushion: every two (2) weeks

Frame: every three (3) months

Headgear: every six (6) months

Fitting Guide

User Guide

The mask contains magnets that may interfere with certain implants or medical devices. Please refer to the support documents for complete labeling information, including magnet contraindications and warnings.

Shipping method

Ground - $5.00 - 5 to 8 business days

Ground order over $50 Free - 5 to 8 business days

Express - $15.00 - 2 to 3 business days

Express orders including PAP device(s)*** Free - 2 to 3 business days

Priority Express $40.00 - 1 to 2 business days

*All rates are shown in US Dollars and subject to change
**Expedite may substitute another carrier at our discretion
***Orders that include the purchase of a PAP device

Delivery will be to the address specified on your order, which must be within the United States and in a state where Expedite is licensed to distribute medical devices. We do not deliver to PO boxes or the following states: 

• Alabama
• Florida
• Montana
• Ohio
• Kentucky
• North Dakota
• Tennessee

The delivery charges specified as part of your order for your selected shipping will apply. Delivery charges will be disclosed in your cart prior to you placing your order.

Once your order has been shipped from our warehouse, you will receive an automated email with the invoice and tracking reference, allowing you to track your order. Title to Products and risk of loss shall pass to you upon delivery of Products to the carrier at the point of shipment.

We take reasonable efforts to meet the delivery times specified in this section. However, occasionally delivery times may be affected by factors beyond our control and therefore they cannot be guaranteed.

You must comply with all applicable laws and regulations of the United States. We will not be liable or responsible if you break any such law.

Standard Returns

Expedite accepts returns of products purchased directly through the Resmed Shop website within 30 days of delivery. To qualify for a refund, items must be unopened, unused, and in their original condition and packaging. 

Please contact our Customer Service team at support@eshop.resmed.com for instructions on how to complete a return.  Refunds for eligible returns will be issued to the original form of payment used for the purchase.  Please note, Expedite cannot accept returns without prior authorization from our Customer Service team.

For more information visit our returns policy