AirFit P10 Starter Pack

Dual-wall technology with trampoline action seals on contact, dispersing air gently to the nose

Key-clip nasal pillows offer effortless assembly, with color coding for easy sizing and left/right orientation

Innovative flexible tube is ultra light and flexible yet highly durable, offering full freedom of movement without compromising seal

QuickFit™ headgear with side-clip makes it easy to use and adjust

QuietAir™ diffused venting technology breaks up exhaled air for a quiet experience

Slip-on headgear is simple to put on and allows you to watch TV or read in bed while wearing the mask

Only three pieces makes assembly, fitting and cleaning a breeze

Note: to use this mask with AirMini the P10 set up pack is required. If you are currently using the AirMini with a different style mask, then you will need to purchase the AirFit P10 Mask Connector

Prescription required

P10 headgear

P10 mask frame

P10 nasal pillow cushions (small, medium, large)

Daily/After each use:

1. Disassemble the pillows from the frame according to the disassembly instructions.
2. Thoroughly clean the separated mask components (excluding headgear), by gently rubbing in warm (approximately 86°F/30°C) water using mild soap.
3. To optimize the mask seal, facial oils should be removed from the pillows after use.
4. Use a soft bristle brush to clean the vent.
Inspect each component and, if required, repeat washing until visually clean.
5. Rinse all components well with drinking quality water and allow to air dry out of direct sunlight.
6. When all components including the vent are dry, reassemble according to the reassembly instructions.

Weekly:

1. Soak the headgear in warm water with a mild liquid detergent.
2. Hand wash the headgear with a soft bristle brush.
3. Thoroughly rinse the headgear under running water.
4. Leave the headgear to air dry out of direct sunlight

Recommended replacement guidelines:

Cushion: once (1) monthly

Frame: every three (3) months

Headgear: every six (6) months

User Guide