AirFit P10 Mask Kit for AirMini

The Resmed AirMini™ P10 setup pack (mask included) connects your AirMini to the Resmed AirFit™ P10 mask for AirMini CPAP nasal pillows mask

Minimalist category, under-the-nose coverage, nasal pillows mask, silicone cushion 

Nasal pillows cushion provides stability to help prevent the mask from moving when you switch sleep positions

New QuickFit™ headgear with side-clip makes it easy to use and adjust

Slip-on headgear is simple to put on and allows you to watch TV or read in bed while wearing the mask  

Only three pieces make assembly, fitting, packing for travel and cleaning a breeze 

Not compatible with HumidX F20 waterless humidification filter

Please note that this mask is different from a standard AirFit P10 mask, which is not compatible with AirMini

Prescription required

P10 mask frame

P10 nasal pillow cushions (small, medium, large)

QuickFit elastic headgear

P10 headgear clips

HumidX™ cartridge

HumidX Plus cartridge

AirMini™ tube

This mask purchase does not include an AirMini CPAP machine.  

Daily Cleaning

Step 1. Take the mask apart into its main component parts, namely the nasal pillows, frame
and mask tube. The HumidX cannot be washed. Set aside the HumidX in a clean, dry location.

Step 2. Gently rub each part in warm water (~30°C or 86°F) and mild liquid detergent until clean, paying attention to the pillows and its small openings.

Step 3. Rinse well under running water and allow to air dry out of direct sunlight.

Weekly Cleaning

Step 1. Take the mask apart into its main components parts, namely the frame, mask tube and the fabric headgear. The HumidX cannot be washed. Set aside the HumidX in a clean, dry location.

Step 2. Gently scrub the frame and its elbow area in warm water (~30°C or 86°F) and mild
liquid detergent with a soft bristle brush.

Step 3. Rub and squeeze the headgear in warm water (~30°C or 86°F) and mild liquid detergent until clean.

Step 4. Rinse both the headgear and frame under running water until the water is clear.
Ensure you also squeeze the headgear while rinsing.

Step 5. Allow both to air dry out of direct sunlight.

User Guide

Shipping method

Ground - $5.00 - 5 to 8 business days

Ground order over $50 Free - 5 to 8 business days

Express - $15.00 - 2 to 3 business days

Express orders including PAP device(s)*** Free - 2 to 3 business days

Priority Express $40.00 - 1 to 2 business days

*All rates are shown in US Dollars and subject to change
**Expedite may substitute another carrier at our discretion
***Orders that include the purchase of a PAP device

Delivery will be to the address specified on your order, which must be within the United States and in a state where Expedite is licensed to distribute medical devices. We do not deliver to PO boxes.

The delivery charges specified as part of your order for your selected shipping will apply. Delivery charges will be disclosed in your cart prior to you placing your order.

Once your order has been shipped from our warehouse, you will receive an automated email with the invoice and tracking reference, allowing you to track your order. Title to Products and risk of loss shall pass to you upon delivery of Products to the carrier at the point of shipment.

We take reasonable efforts to meet the delivery times specified in this section. However, occasionally delivery times may be affected by factors beyond our control and therefore they cannot be guaranteed.

You must comply with all applicable laws and regulations of the United States. We will not be liable or responsible if you break any such law.