AirFit F30i Complete Mask System
AirFit F30i Complete Mask System
AirFit F30i Complete Mask System
AirFit F30i Complete Mask System
AirFit F30i Complete Mask System
AirFit F30i Complete Mask System
AirFit F30i Complete Mask System
AirFit F30i Complete Mask System
AirFit F30i Complete Mask System
AirFit F30i Complete Mask System
AirFit F30i Complete Mask System
AirFit F30i Complete Mask System
AirFit F30i Complete Mask System

Prescription Required

AirFit F30i Complete Mask System

ResMed Rx
UPC: 619498633340
Regular price
$167.00
Sale price
$167.00
Regular price
Sold out
Unit price
per 

Need further support please call customer service at 833 968-2727

AirFit™ F30i is a minimal-contact full face mask designed to keep air tubing out of sight and out of your way, giving you the freedom to comfortably switch positions and sleep the way you want.

Prescription required

  • Featuring top-of-head tube connection so you have the freedom to sleep in different positions while designed to maintain a reliable seal

    UltraCompact cushion is designed to avoid the top of your nose and prevent nasal bridge red mark

    Two magnetic clips to slip your mask on and off with ease

    Quick-release elbow allows you to get up at night and disconnect without removing the mask

    Note: this mask is not compatible with the AirMini

    Prescription required

  • F30i/X30i standard headgear

    F30i/X30i frame (small, standard or large)

    F30i cushion (small, medium, or wide)

  • If there is any visible deterioration of a mask component (cracking, crazing, tears etc.) the component should be discarded and replaced.

    Daily/After each use: cushion

    Weekly: headgear, frame and elbow

    1. Soak the components in warm water with a mild liquid detergent.

    2. Hand wash the components with a soft bristle brush. Pay particular attention to the vent holes in both cushion and elbow.

    3. Thoroughly rinse the components under running water.

    4. Leave the components to air dry out of direct sunlight.

    If the mask components are not visibly clean, repeat the cleaning steps. Make sure that the vent holes and anti-asphyxia valves are clean and clear

    For optimal CPAP therapy results, we recommend replacing your mask parts and accessories on a regular basis

    Recommended replacement guidelines:

    Cushion: once (1) monthly

    Frame System: every three (3) months

    Headgear: every six (6) months

    User Guide

    Fitting Guide

  • The mask contains magnets that may interfere with certain implants or medical devices. Please refer to the support documents for complete labeling information, including magnet contraindications and warnings.