AirFit X30i Frame System (Without Headgear)

SpringFit frame with flexible conduit allows pressurized
air to flow through the elbow and into the frame and cushion

Tube-up mask design moves air tubing out of the way to give patients the freedom to sleep in any position

Pillows cushion rests on the edge of the nares to
seal on contact. The pillows cushion connects to the oral cushion and disperses therapy pressure gently to the patient through the nose

QuietAir™ diffused venting is designed to be quieter than a whisper while minimizing breeze for both patients and bed partners

Oral nasal mask combines the coverage of a full face cushion with the seal and stability of nasal pillows cushion, using dual cushions for comfort and performance

Magnetic clips**snap on and off for easy adjustment
and removal

Modular frame system is compatible with AirFit F30i mask

AirFit™ F30i/X30i frame (small, standard, or large)

Quick-release elbow

Nasal pillows cushion (small, medium or large)

X30i oral cushion

Please note headgear is not included

Daily/After each use: cushion, pillows, oral cushion

Weekly: headgear, frame, elbow

1. Soak the components in warm water with a mild liquid detergent.
2. Hand wash the components with a soft bristle brush. Pay particular
attention to the vents in both cushion and elbow.
3. Thoroughly rinse the components under running water.
4. For AirFit X30i, shake the oral cushion to remove any excess water from the vent.
5. Leave the components to air dry out of direct sunlight.

If the mask components are not visibly clean, repeat the cleaning steps. Make sure that the vents and anti-asphyxia valves are clean and clear.

Recommended replacement guidelines:

Cushions: twice (2) monthly

Frame: every three (3) months

User Guide

The mask contains magnets that may interfere with certain implants or medical devices. Please refer to the support documents for complete labeling information, including magnet contraindications and warnings.