AirFit P30i Frame System (Without Headgear)

Top-of-head connection keeps air tubing out of your way for more freedom

SpringFit frame automatically adjusts to different face profiles

Nasal pillows cushion is interchangeable with AirFit N30i nasal cradle cushion

Soft sleeves designed for added comfort and reduction in facial marks

Quick-release elbow allows you to get up at night and disconnect without removing the mask

QuietAir™ vent breaks up exhaled air for a quiet experience

Includes replacement frame system (without headgear) for the Resmed AirFit P30i CPAP mask

Frame system includes frame, cushion and elbow. Headgear not included

Daily/After each use:

1. Rinse the frame, elbow and cushion under running water. Clean with a soft brush until dirt is removed.

2. Soak the components in warm water
(approximately 86°F/30°C) with a mild liquid detergent for up to ten minutes.

3. Shake the components vigorously in the water for at least one minute.

4. Brush the moving parts of the elbow and around the vent holes.

5. Brush the areas of the frame where the arms connect, and inside and outside the frame where the elbow connects.

6. Rinse the components under running water.

7. Leave the components to air dry out of direct sunlight. Make sure to squeeze the arms of the frame
to ensure that excess water is removed.

Recommended replacement guidelines:

Frame System: every three (3) months

Cushion: once (1) monthly

User Guide