AirFit N20 Complete Mask System

InfinitySeal™ cushion is designed to stay sealed at any airflow pressure setting

Magnetic clips mean two simple snaps and your mask is on or off

Quick-release elbow allows you to get up at night and disconnect without removing the mask

Plush headgear and soft, flexible frame provide added comfort

Note: to use this mask with AirMini the N20 set up pack is required. If you are currently using the AirMini with a different style mask, then you will need to purchase the AirFit N20 Mask Connector

Prescription required

N20 frame system (includes frame, cushion and elbow with short tube)

N20 standard headgear with clips (other sizes available for purchase)

Regularly clean your mask and its components to maintain the quality of your mask and to prevent the growth of germs that can adversely affect your health

Daily/After each use: cushion, elbow and short tube

1. Soak and agitate the AirFit N20 cushion, elbow and short tube in warm water (approximately 86°F/30°C) using a mild liquid detergent for up to 10 minutes.
2. Clean the components with a soft bristle brush, paying particular attention to the small vent holes on the elbow.
3. Thoroughly rinse the components under warm flowing drinking quality water.
4. Inspect each component to ensure that they are visually clean and free of detergent residue. If required, repeat washing.
5. Allow the components to dry out of direct sunlight before assembling.

Weekly: headgear and frame

The magnetic clips on the frame can be left on for washing.

1. Soak and agitate the separated headgear and frame in warm water (approximately 86°F/30°C) using a mild liquid detergent for up to 10 minutes.
2. To rinse the components, repeatedly squeeze them under warm flowing drinking quality water until it is free of detergent residue.
3. Squeeze the components to remove excess water.
4. Allow the components to dry out of direct sunlight before assembling

Recommended replacement guidelines:

Cushion: once (1) monthly

Frame System: every three (3) months

Headgear: every six (6) months

User Guide

Fitting Guide

The mask contains magnets that may interfere
with certain implants or medical devices. Please refer to the support documents for complete labeling information,including magnet contraindications and warnings.